721 Laser Spectrum Analyzer/Wavelength Meter
Bristol Instruments
The 721 series provides the most complete analysis because it operates as both a high-accuracy laser wavelength meter and as a high-resolution laser spectrum analyzer.
Wavelength measurement and spectral analysis with one instrument.
    Features:
  • Absolute wavelength accuracy as high as ± 0.2 parts per million.
  • Spectral resolution as high as 2 GHz.
  • Operation available from 375 nm to 5.0 μm
  • Operation with CW and high-repetition rate pulsed lasers (pulse width >50 ns, repetition rate >50 kHz)
  • Input power requirement as low as 10 μmW
721
721B-MIR
721B-XIR
    Visible
  • 375-420nm
  • 425-630nm
  • 635-1100nm
    NIR
  • 500-630nm
  • 635-1260nm
  • 1270-1680nm
  •  4µm-6.3µm
  • 2µm-12µm
  • IR - 3.5µm-5µm
721 Series Laser Wavelength Meter & Spectrum Analyser
721 Series Laser Spectrum Analyzer- 375 nm to 12 μm
Fabry Perot Interferometer Mirrors
Bristol Instruments
Fabry-Perot Interferometer Mirrors-
Compatible with Burleigh RC series Fabry-Perot interferometers - including models RC-110, RC-140, and RC-150.
  • 50.8 mm mirror diameters
  • Mirror flatness as high as λ/200
  • Standard reflectivity of 99.3%, 97.5%, or 93.0%
  • Wavelength coverage from 450nm to 12μm
Fabry Perot Interferometer  Mirrors
Bristol-FP-Series-Mirrors.pdf
OEM Energy Sensors - Standard & Custom
Ophir
An OEM solution is needed to monitor laser performance in the system, and possibly to provide fast feedback for system control.Depending on your application various configuration can be used:
  • Just a sensor with raw analog output
  • Sensor with electronic providing an amplified or digital output
  • Complet instrument including numeric display and/or PC interface
    Ophir manufactures three main types of pyroelectric OEM sensors:
  1. Low profile pyro sensors with no electronics with a BNC output to connect to the host electronics.
  2. Low profile smart sensors to be used with Ophir smart display.
  3. Compact pyroelectric sensors with built-in amplifiers and signal conditioners which put out a voltage proportional to energy
    Main Features:
  • Energy Ranges: 2μJ to 20mJ/0.1mJ to 10J
  • Spectral Range: 190nm -20µm
  • With built-in electronics, for complete self-contained
  • OEM solution with calibrated square pulse output
OEM Energy Sensors - Standard & Custom - 2µJ - 10J
OEM Energy Sensors - Standard & Custom - 2µJ - 10J
  Contact us    

  Milano Uffici
  +39 02535831
  Roma Uffici
  +39-06 86 89 42 59
Switch in Italian
 QuickSearch: 
    http://comm.bfioptilas.it/en/en/
    >Fibre Optics/Test & Measurements/Spectrum Analyser